Network Password, if you are using 128bit encryption this will be aĢ6 characters. If you enable WEP on the AEBS, you need to note down the Hex Airport To 128bit as there have been some reported issues with connecting a HEX key (or 5 character plain text password) then you may want to upgrade If you are using 64 bit encryption, requiring either a ten character Number and not the plain text you used in the AEBS, unless the plain Used, and if you are using 128 bit that the key will be a 26 digit hexadecimal Remember that the WEP key will depend on the level on encryption been Text and not HEX (or not "correct" length) If you switch to the 802.11b/g compatible mode (and continue to use WPA/WPA2 encryption) you may find that your Windows XP laptop can now connect. If you are using 802.11g radio mode on your Airport Extreme (or Express) wireless network and using WPA/WPA2 encryption you may find that some Windows XP Laptops (my experience is with the Intel 2200BG wireless chipset) will fail to connect to an pure 802.11g WPA/WPA2 wireless network. You think you're in the right mode, but in fact you are in the wrong mode. Check the wireless radio mode of the Airport base station. If you have the new 802.11n Airport Extreme it is possible to be in the wrong mode, in other words running in 802.11n or 802.11a and your Windows laptop can only access 802.11b or 802.11g networks. The solution is to change the channel on the Airport base station from Automatic to a channel between 1 and 11, channel 1 should be fine. As a result some laptops (and some wireless PCI cards) can not access the Airport network. So on some occassions (depending on your local environment) the Airport base station sets itself to channel 13 as the ideal channel. As all Macs can connect on channel 13 and "in theory" all wireless adapters sold in the UK can access channel 13, it does make a weird kind of sense. As other wireless routers default to channel 6 (or channel 1) it makes sense (from a Mac perspective) for the Airport to pick channel 13 as this will result in the least interference and therefore maximum throughput - if there are neighbouring wireless networks. It will see what channels are free and "pick" the channel with the least interference. In Japan they can use all 14 channels.Īpple Airport base stations and Apple computers sold in the UK can use channels 1-13, those sold in the US can only use channels 1-11.Ī lot of non-Apple laptops and wireless adapters sold in the UK are not reconfigured so can only access channels 1-11 despite legally been able to access all 13 channels.Īpple"s Airport default channel on the Airport Extreme base station is usually set to Automatic, what this means is that the base station will decide which is the best channel for the network to operate on. here in the UK (and most of Europe) we can use channels 1-13. It would appear that the problem lies with the channel which is being used by the Airport Extreme base station.Ĩ02.11b/g covers 14 channels, in the US, 802.11 networks can only use channels 1-11. Airport Extreme base station channel is on "Automatic"Ī few people are having problems in connecting their Windows XP PCs and laptops to an Airport network being run by the new 802.11n Airport Extreme wireless router, notably in the UK and in Europe.Įven after troubleshooting and sometimes even removing all wireless security they still can't connect. Them to turn the wireless on and off in order to save battery power.Įnsure that the switch is in the on position. Most Windows laptops with built-in wireless have a physical switch which allows The main reasons people running Windows XP have problems connecting to an Airport base stationĪre. Problems connecting an XP PC to an Airport Base
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |